Ford Transit Cutaway 350 HD in AZ, Sedona

The 138-inch wheelbase gives the 2027 Transit Cutaway 350 HD XL a unique advantage in urban environments and confined job sites. Businesses that frequently navigate crowded streets, loading docks, parking structures, and tight service areas benefit from the vehicle's responsive handling and maneuverability.

The 2027 Ford Transit Cutaway 350 HD XL incorporates modern safety and driver-assist technologies designed to support confidence on the road. Available safety systems help drivers maintain awareness of surrounding traffic and potential hazards while navigating busy streets, highways, and job sites.

Built to handle substantial payload demands, the 2027 Ford Transit Cutaway 350 HD features an impressive 11,000-pound GVWR. This heavy-duty rating allows businesses to maximize cargo capacity while supporting a wide variety of upfit solutions. Whether transporting equipment, tools, supplies, or specialized machinery, the Transit Cutaway 350 HD is engineered to deliver dependable performance under heavy loads.

The dual rear wheel configuration significantly enhances the 2027 Ford Transit Cutaway 350 HD's stability and load-carrying capabilities. By distributing weight across four rear tires, the vehicle can better manage heavier payloads and specialized upfits while maintaining confident handling characteristics. For businesses that require consistent performance under demanding conditions, the DRW setup provides additional support and improved road stability.

At the heart of the Transit Cutaway 350 HD is a 3.5L V6 engine paired with a 10-speed automatic transmission, delivering a balance of power and efficiency suited for commercial duty cycles. Output typically reaches up to 300 horsepower depending on configuration, providing strong acceleration even when fully loaded or upfitted. Rear-wheel drive enhances predictable handling under heavy cargo conditions, while the 10-speed transmission is tuned to maintain torque delivery across a wide range of speeds, improving drivability in both urban and highway applications.

Inside the cab, the Transit Cutaway 350 HD XL trim focuses on durability and functionality rather than luxury, making it ideal for commercial use. The seating layout supports two occupants, with ergonomic controls designed for long-duty cycles and frequent stop-and-go driving. Ford's commercial cab design emphasizes visibility, ease of entry and exit, and straightforward instrumentation, all of which are critical for fleet drivers who spend extended hours on the road.

Built to handle demanding workloads, the 2027 Ford Transit Cutaway 350 HD XL features a reinforced frame and heavy-duty suspension components designed to support a variety of body configurations. The 9,950-pound Gross Vehicle Weight Rating offers substantial payload capacity, making it an excellent choice for businesses that regularly transport equipment, tools, inventory, or passengers.

One of the standout features of the 2027 Ford Transit Cutaway 350 HD XL AWD is its Intelligent All-Wheel Drive system. Designed to automatically adjust power distribution between the front and rear wheels, AWD helps improve traction in challenging weather and road conditions. Businesses operating in regions with rain, snow, dirt roads, or varying terrain can benefit from enhanced control and confidence behind the wheel.

Inside the 2027 Ford Transit Cutaway 350 HD XL trim, the focus is on practicality and durability. The layout is straightforward, with easy-to-clean materials and controls designed for repetitive commercial use. Modern connectivity features such as smartphone integration, Bluetooth capability, and available driver-assist technologies improve usability without distracting from the vehicle's core vocational purpose.

As a cutaway model, the 2027 Ford Transit Cutaway 350 HD XL is specifically built to serve as a foundation for custom commercial bodies. The exposed rear frame allows upfit manufacturers to install cargo boxes, service compartments, ambulance modules, or passenger shuttle bodies with ease. Ford's engineering focus on structural rigidity ensures that the chassis remains stable even under heavy loads and long-term commercial use.

The 2027 Ford Transit Cutaway 350 HD XL AWD is engineered for commercial operators who need maximum stability, traction, and upfit flexibility in a heavy-duty chassis cab platform. Built on Ford's proven Transit Cutaway architecture, this configuration combines dual rear wheels, all-wheel drive capability, and an 11,000-pound GVWR rating to support demanding vocational applications such as shuttle bodies, box trucks, utility service builds, and specialized fleet conversions.

The 156-inch wheelbase offers a balance between maneuverability and cargo capacity, making it a popular choice for mid-to-large vocational builds. This length supports a wide range of aftermarket and OEM upfits while maintaining manageable turning dynamics in urban environments. Whether configured as a shuttle bus, mobile workshop, delivery box, or service body, the extended wheelbase contributes to improved ride stability, particularly when the vehicle is fully loaded or operating in stop-and-go fleet conditions.

The 2027 Ford Transit Cutaway 350 HD is equipped with Ford's 3.5L PFDi V6 engine paired with a 10-speed automatic transmission. In this setup, output is engineered for consistent low-end torque delivery and sustained performance under load, making it suitable for stop-and-go commercial duty cycles and long highway routes alike.

With a 9,950-pound Gross Vehicle Weight Rating, the 2027 Ford Transit Cutaway 350 HD XL sits just under the 10,000-pound threshold commonly referenced in commercial regulations and fleet planning. That rating supports a strong payload capacity while leaving flexibility for body installation, equipment, and cargo systems without quickly exceeding limits.

At the core of the 2027 Ford Transit Cutaway 350 HD XL is a reinforced chassis engineered for commercial durability. The 9,950-pound GVWR rating places it in a sweet spot for operators who need substantial payload capacity without stepping into higher regulatory thresholds in many use cases. The DRW configuration improves rear-end stability, especially when the vehicle is fully upfitted and loaded, helping distribute weight more effectively across the rear axle.

The cutaway chassis design eliminates the rear cargo body, allowing upfitters to install custom-built solutions tailored to business needs. This flexibility is one of the strongest advantages of the 2027 Ford Transit Cutaway 350 HD lineup. The 156-inch wheelbase supports a wide range of body lengths and configurations, from compact utility boxes to extended shuttle bodies.

The 2027 Ford Transit Cutaway 350 HD XL with the 178-inch wheelbase is a key feature for operators who require expanded body configurations. This longer platform supports a wide range of upfit applications including larger cargo boxes, mobile workshops, food service builds, and shuttle-style passenger conversions. The extended wheelbase improves weight distribution across the chassis, reducing stress concentration on the rear axle assembly.

The 2027 Ford Transit Cutaway 350 HD is known for its upfit versatility. The chassis is designed to accept a wide variety of aftermarket and OEM-approved body installations, enabling businesses to customize the vehicle for specific operational needs. Common applications include box trucks for last-mile delivery, shuttle buses for passenger transport, refrigerated cargo builds, utility service bodies for trades, and specialty vocational builds for municipal fleets.

At the core of this configuration is its 11,000-pound Gross Vehicle Weight Rating, which places it firmly in the heavy-duty segment of the 2027 Ford Transit Cutaway 350 HD lineup. This higher GVWR allows operators to carry more demanding upfit bodies and payloads without compromising structural integrity or performance margins.

The 2027 Ford Transit Cutaway 350 HD XL AWD stands out as a highly capable commercial platform designed for serious upfitting and fleet durability. With its reinforced chassis, advanced traction capability, and long-wheelbase flexibility, it delivers a dependable foundation for businesses that need consistent performance, maximum stability, and scalable build potential across a wide range of commercial applications.

With a Gross Vehicle Weight Rating of 9,950 pounds, the 2027 Ford Transit Cutaway 350 HD XL offers substantial carrying capacity while remaining practical for numerous commercial applications. The robust chassis is designed to support a variety of upfit solutions without compromising performance or reliability. Businesses involved in logistics, construction, maintenance services, transportation, and mobile operations can benefit from the vehicle's ability to accommodate demanding workloads while maintaining operational efficiency.

The 2027 Ford Transit Cutaway 350 HD incorporates technology designed to support productivity, connectivity, and fleet management. Modern infotainment systems, available connectivity solutions, and driver-assistance technologies help improve operational efficiency while enhancing the overall ownership experience. Fleet managers can benefit from technologies that support vehicle monitoring, maintenance scheduling, and driver communication, helping businesses maximize uptime and improve operational performance.

The 2027 Ford Transit Cutaway 350 HD XL AWD is designed to meet the demanding needs of businesses that require a durable, adaptable, and capable commercial vehicle platform. Combining a heavy-duty chassis, dual rear wheels, all-wheel drive capability, and an extended wheelbase, this Transit Cutaway configuration provides an ideal foundation for a wide range of vocational applications.

Equipped with a dual rear wheel configuration, the 2027 Ford Transit Cutaway 350 HD is engineered to handle demanding workloads. The dual rear wheels provide enhanced load distribution, increased stability, and improved confidence when transporting heavy equipment, tools, cargo, or specialized upfit bodies.